–––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 40
2.4 Copy a PLU File
The programmed PLU data can be easily copied into a new PLU. The function is very useful to save
time or avoid mistake for the similar PLU data programming, especially in case of long description of
Ingredients.
In PLU Programming Mode, enter a new PLU
number (e.g. 11)
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
Touch the desired PLU data to copy from.
(e.g. PLU 1 – PLU 1)
Note: Change the necessary data if required
(e.g. Egg Plant)
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.
To Next Page
Loading...
