Digi SM-5300 - Page 456

Nutrition Template
–––––––––––––––––––––––––––––––––––––––––––––
52.2 Nutrition Programming
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 455
OPERATION
DISPLAY
5.
Entry necessary field for all tab selection
For label option, touch [LABEL] tab select
label F1 for label1 and F4 for label2 for
printing Nutrition Template
Note: Nutrition label is optional, you may used
in label1 or label2
6.
In [OTHERS] tab, touch [NUTRIPRINT]
to enable Nutrition Print
7.
Touch [NUTRITION] key to entry the
value for Nutrition template
8.
Touch [TEMPLATE] to select template
mode
Select [STANDARD] and entry the value
for necessary field
Note: [DEC] key used to entry decimal position
for left side value for e.g.: Total fat
1234 if key in DEC Value 2, Total Fat
will change to 12.34
Max number for Dec is 3.
Please refer the selection of Template
Mode