Digi SM-5300 - Page 88

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 87
OPERATION
DISPLAY
11.
Method 1: Assign by entering the existing
Department Number by using the keypad.
Enter the Department Number by the
keypad. (e.g. 3)
Touch the desired preset key.
12.
Method 2: Assign by browsing the existing
Department Data.
Touch [DEPT] area to browse the existing
Dept Data.
13.
Touch the desired Dept key.
Or entry Department number by keypad then
touch [ENTER] key.
(e.g. 10 – DEPT 10)
Touch the desired preset key.
14.
Touch [DEPT] key select the word GROUP
display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR