–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 89
Method 1: Assign by entering the existing
Main Group Number by using the keypad.
Enter the Main Group Number by the keypad.
(e.g. 4)
Touch the desired preset key.
Method 2: Assign by browsing the existing
Main Group Data.
Touch [MAIN GROUP] area to browse the
existing MG Data.
Touch the desired Main Group key.
Or entry PLU number by keypad then touch
[ENTER] key (e.g. STAPLE)
Touch the desired preset key.
Note: If page 1 already full touch on [NEXT]
button for select page 2 for more
assigning place.
Touch [MG] key until the word
TRACEABILITY display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR
To Next Page
Loading...
