Digi SM-5300 - Page 92

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 91
OPERATION
DISPLAY
27.
Assign by entering the Tare Number by using
the keypad.
Enter the tare Number by the keypad.
(e.g. 200)
Touch the desired preset key.
(e.g. Row #1, Column #1, page 3)
28.
Touch [TARE] key until the word TAX
display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR
29.
Method 1: Assign by entering the existing
Tax Number by using the keypad.
Enter the Tax Number by the keypad (e.g. 1)
Touch the desired preset key.
(e.g. Row #2, Column #1)
30.
Method 2: Assign by browsing the existing
Tax Data.
Touch [TAX] area to browse the existing Tax
Data.
Note: Touch or key for more selection.