DigiBird VWC2-ROC - Read EDID; Write EDID; User Management; Add User

System Management
28
4.2.1. Read EDID
Select target input or output, click Read EDID and select local folder to save EDID file.
4.2.2. Write EDID
Select targeted input channel, click Write EDID and import EDID file.
4.3. User Management
Default password of Admin account is blank.
Navigate to Setting, click User to enter into setting page.
4.3.1. Add User
Click Add and input required information.
4.3.2. Revise User Information
Select desired user, click Edit, input required information and Save.