Getting Started with Digi 002 & Digi 002 Rack18
To rename I/O paths in I/O Setup:
1 Choose Setups > I/O Setup.
2 Click the Input, Output, Insert, or Bus tab to
display the corresponding paths.
3 To change the name of a path or subpath,
double-click directly on the Path Name, type a
new name for the path, and press Return.
4 Click OK.
Hard Drive Configuration and
Maintenance
Formatting an Audio Drive
On Windows, it is recommended that you start
with newly formatted drives dedicated for au-
dio. For optimum performance, audio drives
should be formatted with the FAT32 or NTFS file
system.
To format and configure an audio drive:
1 Right-click My Computer and choose Man-
age.
2 Under Storage, choose Disk Management.
3 In the Disk Management window, right-click
the hard drive you will use for audio and choose
Format.
4 For optimal disk performance, select 32K from
the Allocation unit size pull-down. This in-
creases how efficiently audio data is written to
and read from the drive.
5 Make sure the Quick Format option is dese-
lected, then click Start, and follow the on-screen
instructions.
6 When formatting is complete, close the For-
mat window.
Audio Drives and Disk Cleanup
The process of recording, editing, and deleting
tracks and sessions can quickly decrease overall
drive performance. It is suggested that you regu-
larly use Disk Cleanup (or an equivalent utility)
to asses the condition of drives and, if necessary,
delete temporary files and other unused data.
I/O Setup dialog, Input tab (Digi 002 shown)
Refer to the Pro Tools Reference Guide (or
choose Help > Pro Tools Reference Guide)
for more information on renaming I/O
paths.
After configuring Pro Tools LE and your
system, you should save an image of your
system using Norton Ghost. Norton Ghost
lets you save and recall known good config-
urations of your system and settings, which
can help you recover if you encounter any
problems in the future.
For more information on Ghost, visit the Sy-
mantec Web site (www.symantec.com)
Pro Tools only supports Basic drive Types.
To Next Page
Loading...
Need help?
General
