Need help?Do you have a question about the DigiDesign 003 Family and is the answer not in the manual?
General| Brand | DigiDesign |
|---|---|
| Model | 003 Family |
| Category | Musical Instrument |
| Language | English |
Details the input/output capacity and features of the 003 family interface.
Details the capabilities of Pro Tools LE software.
Lists requirements for using the 003 family interfaces.
Explains formatting and symbols used in the manual.
Outlines the steps required to install Pro Tools LE on a Mac system.
Guides on installing the software and connecting the 003 family interface.
Instructions for starting and authorizing the software.
Details how to connect FireWire drives for optimal performance.
Provides steps for removing Pro Tools software from the system.
Outlines the steps required to install Pro Tools LE on a Windows system.
Guides on installing the software and connecting the 003 interface.
Instructions for starting and authorizing the software.
Explains the process of installing QuickTime for Pro Tools compatibility.
Provides steps for removing Pro Tools LE software.
Explains the correct sequence for starting and shutting down the Pro Tools system components.
Details system settings within Pro Tools LE for performance tuning.
Explains how to adjust the hardware buffer size for latency management.
Covers setting default sample rate and clock source in Pro Tools.
Explains how to set the default sample rate for new Pro Tools sessions.
Details how to select the system's clock source for synchronization.
Provides system optimization steps for Mac OS to enhance Pro Tools performance.
Provides system optimization steps for Windows OS to enhance Pro Tools performance.
Explains the different operational states of the 003 unit.
Provides an overview of the main control sections on the 003 top panel.
Describes the LCD display, mode switch, and status indicators.
Details the controls within the fader section of the 003, including faders and encoders.
Explains the controls for viewing and editing Pro Tools parameters via Console and Channel Views.
Covers the controls for session transport, navigation, and zooming functions.
Describes the switches for controlling automation data writing and playback.
Details the input controls for microphones and DI sources on the 003.
Explains the controls for control room monitoring features and headphone outputs.
Describes the input controls on the 003 Rack front panel, including gain and filters.
Explains the monitoring features on the 003 Rack front panel.
Details the host, sync, and MIDI data indicators on the 003 Rack.
Explains the operating levels and headroom specifications for audio I/O.
Details the supported sample rates and resolutions for analog and digital I/O.
Describes the analog input connectors (XLR and 1/4") and their functions.
Explains the switches that apply 48V phantom power to mic inputs.
Describes the main and alt analog output connectors.
Explains the main and alt monitor output features.
Details the S/PDIF and Optical digital I/O ports and their capabilities.
Describes the standard 5-pin MIDI input and output ports.
Details the FireWire ports for computer and device connections.
Location of the power switch on the 003 Rack+ front panel.
Description of headphone output jacks on the 003 Rack+.
Details the front panel DI input and its connection.
Explains the input controls for the 003 Rack+, including gain and filters.
Explains the monitoring features on the 003 Rack+ front panel.
Details the host, sync, and MIDI data indicators on the 003 Rack+.
Explains operating levels and headroom specifications for audio I/O.
Details supported sample rates and resolutions for analog and digital I/O.
Describes analog input connectors (XLR and 1/4") and their functions.
Describes analog output connectors and their functions.
Explains S/PDIF and Optical digital I/O ports and their capabilities.
Describes MIDI input and output ports.
Details FireWire ports for computer and device connections.
Guides on connecting stereo headphones and adjusting levels.
Details connecting external sound systems to monitor outputs.
Explains how to connect microphones, guitars, and keyboards to the interfaces.
Provides instructions for connecting microphones, including phantom power.
Guides on connecting instruments like guitars and keyboards to the 003 family.
Explains connections for ADAT Optical and S/PDIF digital devices.
Details Word Clock connections for synchronizing Pro Tools and external devices.
Explains using Pro Tools LE as a Word Clock master or slave.
Guides on connecting external effects devices for sends and returns.
Describes connecting and monitoring alternate sound sources like CD players.
Instructions for recording from digital sources using S/PDIF or Optical I/O.
Explains how to connect MIDI devices to the 003 family interfaces.
Details how to connect and use a footswitch for transport control.
Instructions on how to save a Pro Tools session using the 003 control surface.
Explains how to use Console View for track control and parameter adjustment.
Details how to adjust panning, rename tracks, and assign I/O in Pan View.
Guides on renaming tracks and adding comments in Pro Tools.
Details how to manage sends, levels, and pre/post-fader settings.
Explains how to display, control, and bypass inserts and plug-ins.
Explains how to focus on plug-ins, inserts, or sends for a single channel.
Guides on displaying and controlling EQ plug-in parameters.
Guides on displaying and controlling dynamics plug-in parameters.
Details how to manage sends, levels, and panning in Channel View.
Describes how to customize display settings on the LCD for tracks and parameters.
Guides on customizing plug-in control arrangements and saving them.
Explains how to navigate and edit numerical values in Pro Tools windows.
Covers navigating and creating tracks in Pro Tools, including the New Track dialog.
Details how to assign I/O paths directly from the 003 in Assign mode.
Explains how to manage track and send output windows, including making them active/inactive.
Instructions for enabling and disabling tracks for recording using the Rec Arm switch.
Guides on zooming and navigating within the Pro Tools Edit window.
Explains how to use the Shuttle/Jog wheel for session transport and navigation.
Covers setting track controls to their default settings.
Describes how to undo and redo actions performed in Pro Tools.
Guides on creating, opening, and displaying memory locations.
Explains how to control track display via the control surface.
Describes how to set and suspend automation modes for tracks.
Lists shortcuts for display options on the 003 top panel.
Lists shortcuts for track selection and navigation in Pro Tools.
Explains how the 003 controls external MIDI devices and software beyond Pro Tools.
Guides on how to select different MIDI modes and switch between preset pages.
Instructions for recalling saved MIDI map presets from flash memory.
Details how to assign faders, encoders, and switches to MIDI messages.
Lists the controls that can be assigned in MIDI mode.
Provides instructions for editing MIDI controller assignments and mapping.
Guides on creating custom names for MIDI map presets for easier management.
Explains how to save MIDI mapping assignments as presets.
Describes how to reset MIDI map presets to their factory default settings.
Lists the default MIDI map presets available for different applications.
Instructions for entering Utility mode to run diagnostic tests.
Explains how to navigate through Utility mode pages and exit tests.
Steps to exit Utility mode after tests are complete.
How to check the current firmware version and statistics.
Procedure to test the performance and integrity of the LCD display.
Instructions for testing all LEDs simultaneously or cycling through them.
Test to evaluate the performance and functionality of switches.
Test to evaluate the performance of rotary encoders and the Jog/Shuttle wheel.
Tests for fader and group performance, including automated fader tests.
Test to check MIDI input and output connections using a loopback test.
Tests for various audio connections to verify functionality.
How to identify and configure external MIDI devices using Apple's utility.
Information on importing and managing MIDI patch names for external devices.
How to configure MIDI controllers and sound modules connected to the system.
Details the controls for managing MIDI interfaces within the setup utility.
Explains how to edit instrument properties like manufacturer, model, and ports.
Information on managing MIDI patch names.
Recommendations against recording on the system drive for optimal performance.
Details supported drive formats (HFS+, NTFS) and types for Mac and Windows.
Guides on formatting audio drives for Mac OS Extended and NTFS.
Explains how to partition physical drives into logical volumes.
Instructions for defragmenting audio drives to maintain system performance.
Emphasizes the importance of backing up data before disk optimization.
Information on required disk space for audio tracks at different resolutions and lengths.
Highlights the importance of backing up session data and system configuration.
Troubleshooting steps for when Pro Tools fails to launch or shows errors.
Steps for when Pro Tools does not recognize the audio interface.
Lists conditions that may adversely affect Pro Tools performance.
Information to gather and prepare before contacting technical support.
Information about various Pro Tools guides and documentation.
Details the content of the printed Setup Guide for system configuration.
Describes the printed guide for learning Pro Tools basics.
Explains how to access Pro Tools guides via the Help menu.
Lists the locations of installed PDF guides and Read Me files.
Highlights online resources available on the Digidesign website.
To Next Page
