Chapter 4: Digi 002 Top Panel 41
Navigation and Zoom Section
These multi-purpose keys control the display of
Pro Tools tracks on the Digi 002 control surface,
on-screen zoom functions, and other Pro Tools
navigation functions.
Fader Bank, Nudge and Display Zoom
Switches
Bank When the Bank switch is lit, the Left and
Right arrow keys move the Digi 002 tracks
across the Pro Tools mixer eight faders at a time.
Nudge When the Nudge switch is lit, the Left
and Right arrow keys move the Digi 002 tracks
across the Pro Tools mixer one track at a time.
Zoom When the Zoom switch is lit, the Left and
Right arrow keys zoom the Pro Tools Edit win-
dow display horizontally, and the In and Out
keys zoom the display vertically.
Navigation and Zoom Keys
Text Entry Fields When you are editing numeri-
cal values such as Selection Start, End, and
Length, or Pre- and Post-Roll in the Edit or
Transport windows, the Left and Right arrow
keys let you navigate among editable fields. The
In and Out keys increment or decrement the se-
lected value.
Selection In/Out Points In Bank and Nudge
modes, the Navigation keys mirror the function
of the Up and Down arrow keys on the com-
puter keyboard. You can press these keys to
mark In and Out points during playback, in or-
der to make selections in the Pro Tools Edit win-
dow. If you have already made a selection in the
Edit window, the Up and Down arrow keys
move the selection up and down your track list.
Function/Utility Switches
F1 (Utility) Enters Utility mode during Digi 002
stand-alone operation only. This is where you
set control surface and input preferences, as well
as run pre-programmed diagnostic tests on the
Digi 002 unit.
F2 (Naming) Allows you to name channels while
using Digi 002 in Stand-alone mode only. (See
“Naming Channels” on page 103.)
F3 (Snapshot) Allows you to store and recall up
to 24 mixer configurations for quick recall or for
use as mixer templates, in Stand-alone mode
only. (See “Storing Snapshots” on page 110.)
F4 (Fader Mute) Temporarily disables Digi 002
fader movement while working with Pro Tools,
allowing you to monitor audio playback with-
out fader noise. To disable fader movement,
press F4 while in Pro Tools mode. To restore
fader movement, press F4 a second time.
The Fader Mute feature has no effect on fader
automation or audio levels during playback.
F5 (Focus) Displays controls in the Digi 002
Channel Scribble Strips for the currently active
plug-in window, as in Channel View. To return
to the last Console view, press F5 a second time.
To Next Page
Loading...
Need help?
General
