DigiFrame 7" Digital Picture Frame - Set Brightness and Contrast; Set Color and Tint of the image; Troubleshooting

button to set the time.
(2) Press the LEFT and RIGHT button to select “Save” and then
press the “
” / “ENTER” to confirm the date and time setting.
Set Brightness and Contrast
Select “Brightness / Contrast” to set the brightness and contrast of
the screen.
Press the UP/DOWN button to adjust the contrast. Press the
LEFT/RIGHT button to adjust the brightness.
Set Color and Tint of the image
Select “Color/Tint” to set the shade and tint of the image’s color.
Press the UP/DOWN button to adjust the shade of color. Press the
LEFT/RIGHT button to adjust the tint of color.
11 Troubleshooting
The digital picture
frame cannot be
powered on.
· Make sure that the AC adapter is
connected securely to the frame and the
power source.
Remote control does
not work
· Ensure that a working battery is
inserted
The images can not
be displayed.
· Make sure the image file is in a
supported format.
The image is distorted
or blurred.
· Resolution of the image is too low. Try
using a file with a higher resolution.
The device responds
very slow to
commands.
There are too many files on the memory
device.
- 12 -