To Next PageTo Next Page
Need help?Do you have a question about the Digikeijs DR4088GND and is the answer not in the manual?
General| Manufacturer | Digikeijs |
|---|---|
| Product Code | DR4088GND |
| Number of Inputs | 8 |
| Current Detection | Yes |
| Number of Outputs | 8 |
| Protection | Short circuit protection |
| Weight | 150 g |
| Connector Type | Screw terminals |
| Compatibility | DCC |
| Operating Temperature | -10 to +50 °C |
Details the 24-month manufacturer's warranty and conditions for invalidation, including opening the product housing.
States that printing errors, technical changes, and data/illustrations are non-binding, and all rights are reserved.
Describes the DR4088LN-xx as a 16-input feedback module connectable via LocoNet®, available in CS, OPTO, and GND versions.
Details connection terminal cross-sections and electrical specifications for DR4088CS, DR4088OPTO, and DR4088GND.
Explains how to program the DR4088LN-xx using the DR5000, detailing the step-by-step process.
Describes programming the DR4088LN-xx when chained with other DR4088 modules via S88(N) connection.
Details the lack of factory reset function and how to revert settings by re-entering start address and feedback count.
Illustrates connecting DR4088LN-CS modules to a DR5000 for 2-wire track feedback.
Shows a setup with DR4088LN-CS modules, a DR5033 booster, and a DR5000 for 2-wire track feedback.
Demonstrates connecting DR4088LN-OPTO modules with Hall sensors for 3-wire track feedback.
Presents a wiring diagram for DR4088LN-OPTO with switch track and 2-wire track configurations.
Illustrates connecting DR4088LN-GND modules with switches, buttons, and reed contacts for feedback.
