To Next PageTo Next Page
Need help?Do you have a question about the Digikeijs DR4088OPTO and is the answer not in the manual?
General| Manufacturer | Digikeijs |
|---|---|
| Product Number | DR4088OPTO |
| Type | Control Unit |
| Interface | Opto-Isolated |
| Number of Inputs | 8 |
| Input Type | Opto-Isolated |
| Number of Outputs | 8 |
| Opto-Isolated Inputs | Yes |
Details the 24-month manufacturer's warranty and conditions under which it is voided, such as non-compliance or opening the housing.
States that printing errors, technical changes, and data/illustrations are non-binding and subject to change without notice. Copyright applies.
Introduces the DR4088LN-xx as a 16-input feedback module connectable via LocoNet, available in CS, OPTO, and GND versions.
Details connection terminal cross-sections and provides a table with specifications for DR4088CS, DR4088OPTO, and DR4088GND.
Identifies and describes the physical components and connectors of the DR4088LN module, including LEDs and input/output ports.
Explains how to program the DR4088LN-xx using the DR5000 or other control panels/apps by setting start address and number of feedbacks.
Details programming the DR4088LN-xx when connected in series with other DR4088 modules, specifying start address and feedback counts.
Clarifies that the module has no factory reset function; resetting involves reprogramming the start address and feedback count.
Illustrates the connection of DR4088LN-CS modules to the DR5000 for 2-wire track feedback detection.
Shows a wiring diagram for connecting DR4088LN-CS modules and a DR5033 Booster for 2-wire track feedback.
Depicts the connection of DR4088LN-OPTO modules with Hall sensors for 3-wire track feedback systems.
Illustrates wiring DR4088LN-OPTO modules with switches and reed contacts for 2-wire track feedback.
Provides wiring examples for DR4088LN-GND modules with various inputs like switches, buttons, and reed contacts.
