DigiPos DS-800 - DIP Switch Configuration

Page
-
10
-
6. Pull out a small amount of paper, as shown. Then, close the cover.
7. Tear off the paper as shown.
2
-
4. DIP SWITCH SETTING
The printer is set up at the factory to be appropriate for almost all users. It does, however, offer
some settings for users with special
requirements
.
It has DIP switches that allow you to change comm
unication setting, such as handshaking and
parity check, as well as print density.
Your printer has two sets of DIP switches. The functions of the switches are shown in the