DigiPos DS-800 - Printer Specifications and Compliance; Environmental Requirements; Printer Reliability Metrics

Page
-
19
-
4. Turn on the printer.
6. Specifications
Important!
When using a printer power supply other than optional AC adaptor (HT
-
U1135, LSE
9901B2460), be sure that the following cautions are ob
served.
Use a power supply (Limited Power Supply) of DC 24V
±
10% and more than 1.5A.
Be careful about installing the printer in an area where there is noise.
Take the appropriate measure to protect against electrostatic AC line noise, etc.
6
-
1. Environment
al
Requirements
(1)Operating
Temperature 5
°
C to 45
°
C
Humidity 10% to 90% RH (without condensation)
(2)Transport/Storage (except paper)
Temperature
-
20
°
C to 60
°
C
Humidity 10% to 90% RH (without condensati
on)
6
-
2. Reliability
(1)MCBF 50 million lines (based on an average printing rate of 12.5% with paper
thickness in the range 65µm to 75µm)
35 million lines (based on an average printing rate of 12.5% with p
aper
thickness in the range 76µm to 150µm)
(2)Head Life 100 million pulses, 100Km
(3)Cutter Life 1.0 million
cuttings (
if the paper thickness is between 65 and 90µm)