. The Self Test prints the printer settings and then prints the
following, Cuts the paper, and pauses. (Error LED On)
3. Press the FEED button to continue printing. The printer prints a
4. The self test automatically ends and cuts the paper after printing the following:
eady to receive data as soon as it completes the
users to see exactly what data is c
be useful in finding software problems.
When you turn on the hex dump functi
on, the printer prints all commands and other data in
hexadecimal format along with a guide section to help you find specific commands.
To use the hex dump feature, follow these steps:
1. After you make sure that the printer is off and Dip s/w 1
2. Run any software program that sends data to the printer. The printer prints
and then all the codes it receives in a two
column format. The first column contains the
hexadecimal codes and the second column gives th
characters that correspond to the
1B 21 00 1B 26 02 40 40 .!..& . @ @
1B 25 01 1B 63 34 00 1B .%.. c4 ..
41 42 43 44 45 46 47 48 ABCDEFGH
A period (.) is printed for each code that has no ASC
3. Turn off the printer, and make sure that Dip sw 1
To Next Page
Loading...
Need help?
General
