DigiPos DS-800 - Loading Roll Paper

Page
-
8
-
PIN
S
IGNAL
D
ESCRIPTION
1
Signal GND
-
2
Drawer kick
-
out drive signal 1
Output
3
Drawer open/close signal
Input
4
+24V
-
5
Drawer kick
-
out drive signal 2
Output
6
Signal GND
-
2
-
3. Loading the Roll Paper
Notes: Be sure to use paper
rolls that meet the specifications. Do not use paper rolls that
have the paper glued to the core because the printer cannot detect the paper end correctly.
(Turn off power switch)
☞
Turn off power switch.
1. Make sure that the printer is not receiving
data; Otherwise, data may be lost.
2. Open the paper roll cover by pulling down the cover
-
open lever.