IMPORTANT! The Mix It Plug-In requires Windows XP, Windows Media Player 10 and
an Internet connection.
For Windows ME, Windows 2000 or Windows XP:
Windows will automatically detect this unit without installing any drivers when the unit is
connected using the USB cable.
For Windows98SE:
The USB mass storage function will not be activated without driver installation. To
activate the USB mass storage function, please use the installation CD-Rom to install
the driver.
For Windows 98SE, please follow
these instructions before you connect
your player to your computer for the
first time:
Procedure to Install Player Driver
1. Insert the installation CD-Rom into
the CD Drive, then the installation
screen will appear. If the
installation screen doesn't
automatically appear, double-click
My Computer then double-click on
the CD drive, then the installation
screen will appear. Click “Windows
98 SE Driver”.
INSTALLING THE WINDOWS 98 DRIVER
13