25
OPERATION–VIDEO PLAYBACK MODE
1
TO WATCH VIDEOS
Use the Navigation/Skip Up 1 and/or Down
2 buttons to browse through the video
categories: All Videos, Card (if an SD/MMC
memory card is inserted), Contents (if the
files were transferred using WMP 10). Then
press the Enter/Play/Pause
®p button 3 to
select that category.
Continue to browse through the sub-
categories using the Navigation/Skip Up
1
and/or Down 2 buttons and the Enter/
Play/Pause
®p button 3 until the desired
video is selected. Then, press the Enter/
Play/Pause
®p button 3 to begin playback.
Turn the unit on and access the main menu
as described on page 21. Select the Video
icon (shown above) using the
Navigation/Skip Up button
1, followed by the
Enter/Play/Pause
®p button 2.
NOTES:
• See page 16 for information on uploading video
files to this unit.
• TO AVOID DAMAGE, make sure the unit is OFF
before inserting or removing the SD/MMC
memory card.
• This unit will play the selected video, then all the
following videos. When they finish, it will go back
to the Videos menu.
• If the file format is not supported, "File Not
Supported" will show in the display and the
following video will play.
This unit supports the following video formats: WMV 9 (simple profile, 220 x 176
resolution, 30 fps, 384 kbps max) + WMA 9 (sample rate of 8-48 kHz).
3
2
To Next Page
Loading...
Need help?
General
