WARNING! Do not format this player unless it stops working and you are
instructed to do so by technical support personnel.
Formatting the Player
1. Use the USB cable to connect the player and
the computer.
2. Double-click on My Computer, then right-click
"Disney Mix Max" or “Mix Max” and left-click
on "Format".
3a. For "Disney Mix-Max", at the “Format”
window, click OK to confirm and the player will
start to format (see figure below). When
finished, click “OK” to close the Format
window.
3b. For “Mix Max”, at the "Format" window, select
"FAT32" from the file system pull-down menu,
then click start to format the unit (see figure to
the right).
NOTE: Make sure you have selected "FAT32" at
the file system pull-down menu,
otherwise after formatting, the player
will not work properly.
4. Click OK to confirm and the
player will start to format.
5. When finished, click "Close" to
close the Format window.
FORMATTING THE PLAYER
45
482MB
Format window for “Mix Max”
Format window for “Disney Mix-Max”
To Next Page
Loading...
Need help?
General
