14
Using the Flash
Your camera has two flash settings:
Ö Auto-flash: the flash fires automatically
according to lighting conditions. Use this
mode for general photography
Ö Flash Off: the flash won’t fire under any
circumstances. Use this mode when
taking images in a place where flash
photography is prohibited, or when the
subject is distant (beyond the range of
the flash).
Note
The flash cannot be used when battery power is
low (
).
Setting the LCD Brightness
Three brightness settings are available:
Ö Low LCD Brightness: Normally
sufficient in dim lighting conditions
Ö Normal LCD Brightness: Use in
intermediate lighting conditions.
This is the default setting.
Ö
High LCD Brightness: Use in
bright conditions.
To Next Page
Loading...
Need help?
General
