Digital Extender HS-66M - Pecifications of the Product; 3 How to Use; How to Set Channels

Copyright 2007 RTcom USA., Inc.
7
2-2 pe
120Hz, 2k,
such as VESA standard or projectors
12-bitYCbCr 4:2:2
Dolby® True HD, DTS-HD and DVD-Audio
ol: Front panel push button, IR remote controller,
RS-232C port: 9 pin female D connector,
CP/IP): RJ-45 Connector 10/100 Base-T
t / 6 output(HS-66M), 8 input / 8 output (HS-88M)
e 19” standard rack (2U)
• e (Wid * Length *Heigh 17.7 * 87 *2.3 * 2
• Weight: 6.77 lb (3.07kg)
How o use
buttons are displayed with 2 steps as follow.
ation is completed.
S cifications of the product
• Type of signals: TMDS signals, digital R.G.B. & Audio
• Data transmission band: up to 2.25 GHz.
• 80i, 1080p@60Hz,1080i/720p@ Resolutions: 480p,720p,10
If customers display suppo
rts specific resolutions
the EDID data should be saved to matrix first.
• bCr, 4:4:4, 16/20/24/30/36-bit YCbCr, 4:2:2, 8/10/12/24/30/36-bit, RGB YC
•
• Router contr
LAN (T
• Input-output port: 6 inpu
• Input-output connector: HDMI 19 pin female
• Power source: AC/DC Adapter 100-240 VAC / DC12V, 5A
• Power consume: 20 Watt
• Rack ear mountabl
Siz th t): 7. 6 inch (450 00 * 60 mm)
3. t
3-1 How to set channels
If the switch is power ON, then preview
If each preview button is lit, then the initializ
1. Initialization display
----------- INPUT ----------------- ---------- CONTROL -----------
1 2 3 4 5 6 CREATE PREVIEW E C EDID NTER ANCEL
CRE PRE ENT CAN EDI
1 2 3 4 5 6
----------- OUTPUT -----------------
2. Channel display and input selection
Aft he
-----------
er t initialization, preview button is lit.
INPUT ----------------- ---------- CONTROL -----------
1 CREATE PREVIEW ENTER CANCEL EDID 2 3 4 5 6
CRE PRE ENT CAN EDI
1 2 3 4 5 6
----------- OUTPUT -----------------