Need help?Do you have a question about the Digital Identification Solutions XID 8300 and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Interface | USB 2.0, Ethernet |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Print Technology | Re-transfer |
| Print Capability | Single-sided and double-sided |
| Card Size | CR-80 |
| Operating Temperature | 15°C to 35°C |
| Operating Humidity | 20% to 80% non-condensing |
| Card Capacity | Input hopper: 200 cards (0.76 mm / 30 mil) Output hopper: 100 cards (0.76 mm / 30 mil) |
| Card Thickness | 0.25 to 1.02 mm |
General safety instructions to be read before using the printer.
Explains the meaning of graphical symbols used for safety and damage prevention.
Critical safety warnings related to electrical shock, fire hazards, and physical damage.
Important cautions to prevent electric shock, injury, and property damage during operation and handling.
Guidelines for safe and proper printer installation and operation.
Handling and storage guidelines for retransfer film, ink ribbon, and cards.
Identification and description of the printer's internal components.
Technical specifications of the printer, including recording system, density, and environment conditions.
Step-by-step guide for printing a card using the printer.
Explanation of the operation panel's layout and buttons.
Meanings of various icons displayed on the printer's operation panel.
Descriptions of printer status messages like 'Boot Up', 'Initializing', 'Ready', etc.
Overview of accessing and changing printer settings via the operation panel or computer.
Instructions for updating the printer's firmware.
Settings for print density levels (YMC, Black, UV, PO).
Settings for retransfer temperature and speed.
Step-by-step guide for updating the printer's firmware.
Steps for replacing the ink ribbon when it runs out.
Steps for replacing the retransfer film when it runs out.
Procedure for cleaning the thermal head.
General guide to interpreting error codes and messages.
A comprehensive list of error codes and their corresponding page references.
Procedure for clearing a card jam in the hopper.
Procedure for clearing a card jam in the turn over unit.
Procedure for clearing a card jam in the magnetic encoder unit.
Procedure for clearing a card jam in the card feed roller.
Procedure for clearing a card jam near the card outlet.
Procedure for clearing a card jam near the retransfer heating roller.
Troubleshooting overheating of the thermal head.
General procedure for clearing card jams.
Detailed steps to remove a jammed card from the hopper.
Detailed steps to remove a jammed card from the turn over unit.
Detailed steps to remove a jammed card from the magnetic encoder unit.
Detailed steps to remove a jammed card from the card feed roller.
Detailed steps to remove a jammed card from the card outlet.
Steps to take if a jammed card cannot be discharged from the outlet.
Detailed steps to remove a jammed card near the retransfer heating roller.
Solutions for various printing quality issues.
Troubleshooting common operational problems.
Steps to resolve issues with cards not feeding into the printer.
Troubleshooting steps when the printer does not power on.
Solutions for printing not starting or stopping midway.
Guidance on physically installing and connecting the printer.
Precautions and clearances for installing the printer.
Detailed procedure for installing the ink ribbon cassette.
Detailed procedure for installing the retransfer film cassette.
Instructions for connecting the printer to a computer.
Steps for connecting the printer via USB cable.
Steps for connecting the printer via LAN cable.
To Next Page
