Ethernet Power Controller 7
digital-loggers.com
2
Features
Congratulations on selecting the DLI Ethernet Power Controller 7,
a smart rack-mount AC power switch. Features include:
Simple Web Interface
The internal web server is accessible from any browser; simply
enter an IP. Conguration and control are web-based.
AutoPing™ Reboot
AutoPing continuously monitors an IP address. If a server, router,
or other peripheral goes down, AutoPing can power cycle to
automatically reboot it without user intervention. Several devices
can be monitored simultaneously.
8 Switched Duplex Circuits + 2 Unswitched Outlets
Eight individual switch control circuits are provided with duplex
outlets. Outlets are spaced for plugs and adapters. Un-switched
outlets are provided for “always on” devices. Switched outlets are
metered in two banks. Unswitched outlets are unmetered.
Programmable LCD Display and Keypad
A 2x16 LCD displays status for each outlet. Custom messages
can be displayed via Lua scripts. A front-panel keypad provides
local control and can be disabled.
Multi-User Password Security
Multi-user authentication limits access to the power controller. The
administrator selects which outlets each user controls.
Sequenced “On Timer”
A programmable delay timer allows outlets to be switched on
in sequence, rather than simultaneously. Many devices draw
a surge of power when initially switched on. Using this timer,
more equipment can share a single circuit without overloads.
Programmable scripts can be used to create customized power-up
and shut-down sequences with variable timing.
To Next Page
Loading...