Digital Projection E-Vision Laser 7500 Series Installation And Quick Start Guide

page 48
Digital Projection E-Vision Laser 7500, 8500 & 10K Series
Operating Guide
USING THE PROJECTOR
Rev D August 2017
Geometry menu continued from previous page
Overscan
Use this setting to compensate for noisy or badly dened image edges.
Crop removes unwanted artifacts from the edges of your image by cropping the edges.
Zoom increases the size of the image to force the edges off-screen.
Image with noisy edges Overscanned image
Notes
Some settings may be unavailable
depending on other settings. For
more information, see Possible
Combinations Of Settings further
in this guide.
Geometry
Digital Zoom & Shift
Overscan
Aspect Ratio
Blanking
4 Corners
Rotation
Keystone
Pincushion / Barrel
Custom Warp
u
Off
Source
u
u
u
u
u
Off
Off
Crop
Zoom

Digital Projection E-Vision Laser 7500 Series Specifications

General

Resolution	1920 x 1200 (WUXGA)
Light Source Life	20, 000 hours
Input Lag	16ms
3D Support	Yes
HDBaseT	Yes
Brightness	7500 Lumens
Light Source	Laser
Weight	19 kg (without lens)