User’s Manual | 58
-Technical Tips-
1. If your DVR is connected behind the router be sure to login to your router to open TCP/IP Port, Mobile Port,
and Web Port and forward them to the DVR IP address.
2. If the DNS Server is using an internal IP (192.168.0.2 or 10.10.10.2), the system can block DDNS registration
information, due to router setting error or network security reasons in the DHCP setting. Therefore, we recommend the
user to use a public DNS instead of an internal IP.
3. Ask your Internet Service Provider to get DNS Server IP address. –OR–
4. Pick and use one of the following DNS Server from the following list: http://www.dnsserverlist.org. –OR–
5. Try one of the following Public DNS Server IP:
168.126.63.1
168.126.63.2
203.248.2
164.124.101.2
6. Go to NETWORK > DDNS > TCP/IP Port.
7. You can use one of the two ports 80 or 8245. Default is 80.
It is recommended to reboot the system after setting. Enter your DVR NAME and click [CHECK] button to check out if the DVR
name is duplicated or available.
To Next Page
Loading...
