101 | Chapter 3: Mac ACS (Advance Client Software)
To modify, double-click on the item. For example, double-click [new site] to change the name.
Press after modifications has been made.
No. Function Description
1 Name Enter the location name or the DVR name of the site to be registered.
2 Address Enter the IP address or DDNS (DVR Name) of the DVR
3 Port Enter the port number of the site to be registered. Default is 9010.
4 User ID Enter the ID of the DVR to be connected.
5 User Password Enter the password of the DVR
6 channel
Fill in number of channels of the DVR. If the DVR is 1 channels, type in “1-4”;
“1-8”; “1-16”
7 Model Select model number of the DVR to be registered.
To delete the registered DVR information, select the DVR and click.
Press after modifications has been made.
To Next Page
Loading...
