Digital Watchdog VMAX - Live Display Mode

User Manual | 16
2.2 Live Display Mode
2.2.1 Channel Selection
After the camera channels are connected, the live real-time display mode is controlled through an easy button operation.
The images can be seen on real-time by 1, 4, and PIP screen. Press the Up & Down Arrow buttons on the front panel or IR
remote controller to change the display screen sequentially.
[1 Channel]
[4 Channel]
[PIP Mode]
To select a channel by mouse, place the cursor on the desired channel and click the left mouse button. To return to previous
screen mode, click the left mouse button again.
N
OTE
To select a channel using the mouse, the user is required to perform a slow and clear click of the left mouse button.