Digital Watchdog VMAX - Rear Panel

User Manual | 12
1.5 Rear Panel
4CH Compact Case 270 (W) x 71 (H) x 215mm (D)
No. Name Description
1 Video-In Camera inputs (Supports NTSC/PAL)
2 Audio-In Audio Input Device (with Amplifier)
3 Audio-Out Audio Output Device (with Amplifier)
4 Video-Out Main Composite Monitor Output
5 Spot-Out Spot Composite Monitor Output
6 RS-232 Port RS-232 Input Device (POS)
7 USB Port USB Port (Ver 2.0) for Mouse Operation, Backup Device, or Firmware Update
8 VGA Port VGA Monitor
9 LAN Port 100Mbps RJ45 Ethernet Connection Terminal
10 Power Input
Power Supply Connection 12 vDC at 3.33Amps 4Channel VMAX
12vDC at 6.67Amps for 8 & 16 Channel VMAX
11 Sensor Input Sensor Input
12 Alarm Output Alarm Output
13 RS-485 Port PTZ Dome Camera or External Keyboard Controller connection
1.5.1 Video-In
To connect the camera input to the corresponding channel marked on rear panel
1.5.2 Audio-In
To connect audio input
1.5.3 Audio-Out
To connect audio output
NOTE
Carefully check whether the specifications of the peripheral devices match the DVR’s specifications.
NOTE
Camera input voltage level is 1Vp-p±10%.
NOTE
Use of audio output with an amplifier is recommended.