Digital Watchdog VMAX - Freeze Mode; Call Monitor Operation

21 | Chapter 1 : DVR User Manual
2.3 Freeze Mode
Press [FREEZE] button on the front panel; or click the right button on the mouse when viewing a live image and select the
[FREEZE] option on the pop-up menu. In the Freeze mode, the image pauses; the date/ time information does not; and the
system clock continues running. Press [FREEZE] to pause the live view. To resume the live view, press [FREEZE] again, or click
the right button on the mouse and select the [FREEZE] option.
2.4 Call Monitor Operation
Press the [CALL MON] button on the front panel, or click the right button on the mouse and select the [CALL MONITOR] option
in order to enter Call Monitor Control mode. The numeric panel will pop up at the center of the screen.
Click the specific channel button on the numeric panel to display full screen mode out of assigned spot out channels.
• Press the [CLOSE] button on the bottom of the numeric panel to go back to the previously programmed Spot Monitor
mode.