User Manual | 14
1.6 IR Remote Controller
The IR remote control allows the use to operate the DVR without having to use the mouse or the front panel buttons.
To use IR Remote Controller, the ID of the IR Remote Controller must be same as the ID of the DVR.
Default ID # for DVR and IR Remote Controller is “1”.
If you have more than one DVR, you can use one IR remote to control each DVR by setting a unique ID for each DVR.
No. Functions
1 Start Instant Emergency Record
2 Numeric Buttons
3 Auto-Sequence on Live Display Mode
4 Freeze Button to Pause Live Video
5 Call Monitor Activation
6 Channel Selection
7 Instant Playback
8 Search Button
9 OK (Select) Button
10 Audio Mute
11
Playback Control on Search Mode
(Fast Backward/Playback/Stop/Fast Forward)
12 Exit Menu Setup
13 Display Mode
14 Zoom B
15 PIP Mode
16 Bookmark
17
To Next Page
Loading...
