To Next Page

To Previous Page

Section Two - Getting Started

Making Connections

There are several different connection options available with the BP355. Before connecting the

BP355, make sure that the power to your ampliﬁer and the BP355 is turned off. There is no

power switch on the BP355. To turn the BP355 on or off, connect or disconnect the included

PS0913B power supply from the Power Input jack.

Mono Operation - Ampliﬁer

Connect your bass to the Input of the BP355. Connect a single mono instrument cable from

the Left (Mono) output of the BP355 to the instrument input or effect return on your ampli-

ﬁer. Set the ¼˝ Amp/Mixer switch to Amp.

Bass Amp Input/

Effect Return

¼” Amp/Mixer

switch set to “Amp”

¼” Left (Mono) Output

Input

Stereo Operation

For stereo operation connect the bass to the Input of the BP355. Connect one cable to the

BP355’s Left (Mono) output, and another cable to the BP355’s Right output. Connect one

cable to the input of one ampliﬁer, channel of a mixer, or power amp. Connect the second

cable to a second ampliﬁer, second channel of a mixer, or power amp. If connecting to a mixing

console, set the pan controls of the mixer channels hard left and right in order to retain stereo

separation. If connecting to a mixer, set the ¼˝ Amp/Mixer switch to Mixer. If connecting to

two ampliﬁers, set the ¼˝ Amp/Mixer switch to Amp.

Stereo Amp Setup

Bass Amp Inputs/

Effect Returns

¼” Left (Mono)

Output

Input

¼” Right Output

¼” Amp/Mixer

switch set to “Amp”

DigiTech BP355 User Manual

Other manuals for DigiTech BP355