16
Amplifier
Amp Modeling is a technology which applies the tone of several popular modern and vintage
amps.
Note: You can select different Amp models and/or modify Amp settings for each amp channel
(Amp A and Amp B). When the Amp row is selected, press the Amp A/B Footswitch to select
a channel. The display will show which channel is selected (Amp A or Amp B).
Amp Model - Knob 1 selects one of the classic, modern, and DigiTech custom Amp
models. Press this knob to turn Amp and Cabinet modeling on and off. Note that when
you select an Amp model, the default Cabinet model is automatically selected. You can,
however, change the Cabinet model after selecting an Amp model.
RCKSVT Based on an Ampeg® SVT
ASHDWN Based on an Ashdown
TM
Bass
Magnifier
BASSMN Based on a Fender® Bassman®
SOLAR Based on a Sunn® 200S
STELAR Based on an SWR® Interstellar
Overdrive™
COMNDO Based on a Trace-Elliot®
Commando™
BOMBER Based on an Ampeg B15
HIWTAG Based on a Hiwatt® Custom 50
BOOGIE Based on a Mesa Boogie® 400+
BASIC Based on a SWR® Basic Black
900JCM Based on a Fender Dual
Showman™
DEMTER Based on a Demeter
TM
VTBP-201S
57dlux Based on a ‘57 Fender Tweed
Deluxe
65TWIN Based on a ‘65 Fender Blackface
Twin Reverb®
77mstr Based on a ‘77 Marshall® Master
Volume
topbst Based on a ‘63 Vox® AC30 Top
Boost
rectfr Based on an ‘01 Mesa Boogie®
Dual Rectifier
TM
digslo DigiTech® Solo
DIGCLN DigiTech Clean Tube
diggan DigiTech High Gain
DIRECT Direct
Cabinet - When the Amp/Cabinet row is selected, Knob 2 selects the speaker Cabinet
model.
AC1X18 Based on an Acoustic® 360 1x18
AM1X15 Based on an Ampeg® Portaflex
1x15
SW1X15 Based on an SWR® Basic Black
1x15
SU2X15 Based on a Sunn® 2x15
ED4X10 Based on an Eden
TM
4x10 with horn
BM4X10 Based on a Fender® Tweed
Bassman® 4x10
HW4X12 Based on a Hiwatt® 4x12 with
Fane speakers
AM8X10 Based on an Ampeg 8x10
DL1X12 Based on a Fender Tweed Deluxe
1x12
TW2X12 Based on a Fender Dual
Showman® 2x12
VX2X12 Based on a Vox® AC30 Top Boost
2x12
MA4X12 Based on a Marshall® 1969
Straight with Celestion®
G12-T70 speakers
VTG412 Based on a Mesa Boogie® with
Celestion Vintage 30’s
Direct No cabinet model
Amp Gain - Knob 3 adjusts the Gain (distortion) for the selected Amp model (not avail-
able for Direct). The Gain parameter ranges from 0 to 99.
Amp Level - Knob 6 adjusts the Level (volume) of the selected Amp model. The Level
parameter ranges from 0 to 99.
Disclaimer: AutoYa, DigiTech, DOD, Death Metal, Grunge, Lexicon, Multi Chorus, Whammy, and YaYa are trade-
marks of Harman International Industries, Inc. Other product names modeled in this product are trademarks
of their respective companies that do not endorse and are not associated or affiliated with DigiTech or Harman
International Industries, Inc. They are trademarks of other manufacturers and were used merely to identify
products whose sounds were reviewed in the creation of this product.
To Next Page
Loading...
Need help?
General
