5
10. INPUT B Jack
Connect a second input to this jack for stereo or dual operation. When a connection is made to this jack,
INPUT A is fed through CAB A and INPUT B is fed through CAB B. These are passed separately to OUTPUTS A
and B to keep separation between channels.
11. OUTPUT A Jack
Connect this output to a single mixer channel or single input of an audio interface. If running long cable
distances, more than approximately 25', a DI box should be used for best signal performance. Only CAB A
will be heard at this output when the pedal is active.
12. OUTPUT B Jack
Connect this output to a second mixer channel or a second input of an audio interface. If running long
cable distances, more than approximately 25', a DI box should be used for best signal performance. Only
CAB B will be heard at this output when the pedal is active. If only INPUT A is connected, the signal will be
split to both OUTPUT A and OUTPUT B. If INPUT B is connected, only the INPUT B signal will pass through
OUTPUT B.
To Next Page
Need help?
General
