EasyManua.ls Logo

DigiTech Genesis 3 - Reverb Effect Details; Reverb Types and Parameter Settings

DigiTech Genesis 3
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reverb
Reverb can give the listener a sense that the material is being performed in
various acoustical environments. It can provide the tight acoustics of a small room,
or the ambience of huge arena.
Reverb On/Off - The DATA knob turns the Reverb on and off.
Reverb Type - The P1 knob selects the Type of Reverb or acoustic environment.
The Genesis3 provides ten different environments to choose
from including:
PreDelay - The P2 knob adjusts the amount of time (PREDLY) it takes for the
initial sound to reach the first reflective surface in the simulated
environment. Ranges from 0 to 15.
Decay - The P3 knob adjusts the length of time the Reverb is audible (DECAY).
Ranges from 1 to 99.
Damping - The P4 knob controls the amount of sound which is absorbed
(DAMPNG) in the simulated environment. Ranges from 0 to 99.
Reverb Level - The P5 knob adjusts the volume (RVBLVL) of the Reverb. Ranges
from 0 to 99.
* Reverb Balance - The Reverb Balance adjusts the left/right balance of the
Reverb signal. Ranges from L 99 to R 99.
Reverb
La Reverb puede darle al oyente la sensación de que el sonido es ejecutado en
distintos entornos acústicos. Puede darle la fuerte acústica de una pequeña
habitación, o la ambientación de un gran estadio.
Reverb On/Off - El mando DATA activa y desactiva la reverb.
Tipo Reverb - El mando P1 elige el tipo de reverb o entorno acústico. El
Genesis3 le ofrece diez entornos distintos entre los que puede
elegir, incluyendo:
PreRetardo - El mando P2 ajusta la cantidad de tiempo (PREDLY) que tarda el
sonido inicial en llegar a la primera superficie reflexiva del entorno
simulado. El rango es de 0 a 15.
Decaimiento - El mando P3 ajusta el tiempo que tarda la reverberación en ser
audible (DECAY).El rango va de 1 a 99.
Amortiguación - El mando P4 controla la cantidad de sonido absorbido
(DAMPNG) en el entorno simulado. El rango va de 0 a 99.
Nivel de reverb - El mando P5 ajusta el volumen (RVBLVL) de la reverb. El rango
va de 0 a 99.
* Balance Reverb - Este parámetro ajusta el balance izquierda / derecha de la
señal de reverb. El rango está entre L 99 y R 99.
Effects/Efectos
21
STUDIO = Studio/Estudio de grabación
ROOM = Wood Room/Habitación en madera
CLUB = Club/Club
PLATE = Plate/Láminas
HALL = Hall/Salón
AMPTHR = Amphitheater/Anfiteatro
CHURCH = Church/Iglesia
GARAGE = Parking Garage/Garaje
ARENA = Arena/Gran estadio
SPRING = Spring/Muelles

Table of Contents

Related product manuals