PreDelay - The Parameter 2 knob adjusts the amount of time (PREDeLaY) it takes for the initial
sound to reach the first reflective surface in the simulated environment. Ranges from 0 to
15.
Decay - The Parameter 3 knob adjusts the length of time the Reverb is audible (DECAY). Ranges from
1 to 99.
Damping - The Parameter 4 knob controls the amount of sound which is absorbed (damping) in
the simulated environment. Ranges from 0 to 99.
* Reverb Balance - The Reverb Balance adjusts the left/right balance of the Reverb signal. Ranges
from L 99 to R 99.
Reverb Level - The Parameter 5 knob adjusts the level (rvb levl) of the Reverb. Ranges from 0 to
99.
* These Parameters are only available using the G
ENEDIT™ computer editor software.
STUDIO = Studio
ROOM = Wood Room
CLUB = Club
PLATE = Plate
HALL = Hall
THEATER = Amphitheater
CHURCH = Church
GARAGE = Parking Garage
ARENA = Arena
SPRING = Spring
29
Effects and Parameters
To Next Page
Loading...