DigiTech GeNetX BNX3 - Expression Parameter Assignment List; Whammy;Synth Parameters; Stompbox Effect Parameters

5. Rotate the Parameter 3 knob to select the maximum value the assigned parameter reaches when the
Control footswitch is turned on (not available when volume is the assigned parameter).
6.While on Control footswitch assignment #1 only, rotate the Parameter 4 knob to select the type of
footswitch function you want it to perform,Toggle,
toggle, or Momentary, momentary.
7. Store the assignment to your preset. See page 17 for more information on storing a preset.
Expression Parameter Assignment List
The following Parameters can be assigned to the any of the 3 Expression Pedal links, LFO 1, or LFO 2.
NO LINK (No Link) - No Parameter is assigned
cmponoff (Compressor/Fretless On/Off) - Turns the Compressor or Fretless effect on and off.
low band (Compressor Low Band) - Controls the Compressor’s Low Band.
highband (Compressor High Band) - Controls the Compressor’s High Band.
crosover (Compressor Crossover) - Controls the Compressor’s Crossover frequency.
CMP levl (Compressor Level) - Controls the Compressor’s overall Level.
Amount (Fretless Amount) - Controls the Fretless Simulator Amount.
attack (Fretless Attack) - Controls the Fretless Simulator Attack.
Senstvty (Fretless Sensitivity) - Controls the Fretless Simulator Sensitivity.
wahonoff (Wah On/Off) - Turns the Wah on and off.
SYNonoff (Whammy™/Synth On/Off) - Turns the Whammy™/Synth module on and off.
Whammy™/Synth Parameters
Active Effect
Whammy™
amount wham pdl Wham mix
IPS shift scale key level
Detune amount MOD Bal
Pitch amount mix
Octavider senstvty attack synthlvl sublevel
Synth senstvty attack start stop
Filter senstvty attack range sweep
Envelope Filter senstvty blend range sublevel
stompbox
(Stompbox On/Off) - Turns the Stompbox module on and off.
Stompbox Effect Parameters
Screamer drive tone level
Rodent dist filter volume
DS Dist dist tone level
DOD 250 gain level
Big MP sustain tone volume
Guy OD drive level
Sparkdrv gain tone clean volume
Grunge grnggain butt face loud
Fuzzy fuzz volume
Zone dist mid freq mid lvl low high level
AMP CHaN
(Amp Channel) - Switches Amp Channels.
Amp WARP (Amp Warp) - Warps the Green and Red Amp Models.
Cab WARP (Cabinet Warp) - Warps the Green and Red Cabinet types.
WARP (Warp) - Warps the Green and Red Channels.
Grn GAIN (Green Gain) - Controls the Amp Gain for the Green Channel.
64
Other Functions