preset examplE.
2. Rotate the DATA WHEEL until the flashing character in the display is an E.
3. Press the DRUMS button once and the second character begins to flash.
4. Rotate the DATA WHEEL again until the flashing character is an X. Continue using the Drums
button to select the character location and the Data Wheel to change the characters.
5. Once the Display reads exampLE,press STORE again.The numbers in the red numeric display are
flashing.
6. Rotate the DATA WHEEL to select 48 as the destination.
7. Press STORE once more to save the preset.
Congratulations! You have successfully created a Preset.
37
Tutorial
To Next Page
Loading...