7
10. Foot Switch - Turns the effect on and off. The Foot Switch is also
used for tapping in the delay time when using the Tap Tempo delay
feature and for arming the Loop recording when the LOOP type is
selected.
11. Output 1 (Mono) - Connect this output to the input of a single
guitar amplifier, another pedal input, or amp effects return.
12. Output 2 - Connect this output to the input of a second guitar
amplifier when a second amp is being used. When only the Input 1
(Mono) is connected and both Output 1 and Output 2 are used, all
delays except for MODULATED, SLAPBACK, REVERSE and LOOP act
as ping pong delays, meaning repeats alternate equally back and forth
between Output 1 and Output 2.
Note: Use unbalanced mono instrument cables only.
To Next Page
Loading...
Need help?
General
