Push these pins in to release the pedal from the pedal chassis exposing
the battery compartment. (See battery replacement diagram.)
8. Pedal
Press the pedal to turn the effect on and off.
9. Out 1(Mono) Jack
Connect this output to a single guitar amplifier when only one amp is
being used.
10. Indicator LED
This LED indicates when the effect is turned on. If the LED becomes
dim or does not light when the cables are connected, the battery needs
to be replaced.
11. Out 2 Jack
Connect this output to a second amplifier for true stereo chorusing.
Stereo is the best way to get the most effective chorusing experience
from the Multi Chorus pedal.
To Next Page
Loading...
Need help?
General
