17
Cabinet - When the Amp/Cabinet row is selected, Knob 2 selects the speaker Cabinet
model.
- Based on a 1x8 ‘57 Fender
®
Tweed Champ
®
- Based on a 1x12 ‘57 Fender
Tweed Deluxe
®
- Based on a 1x12 ‘65 Fender
Blackface Deluxe Reverb
- Based on a 2x12 ‘57 Fender
Blonde Bassman
®
- Based on a 2x12 ‘65 Fender
Blackface Twin Reverb
®
- Based on a 2x12 ‘63 Vox
®
AC30
Top Boost w/ Jensen
®
Blue Backs
- Based on a 4x10 ‘59 Fender
Tweed Bassman
®
- Based on a 4x12 Marshall
®
1969
Straight w/ Celestion
®
G12-T70
- Based on a 4x12 Marshall 1969
Slant w/ Celestion 25W Green
backs
- Based on a 4x12 Hiwatt
®
Custom
w/ Fane Speakers
- Based on a 4x12 ‘96 VHT
®
Slant
w/ Celestion Vintage 30’s
- Based on a 4x12 Johnson
®
Straight w/ Celestion Vintage 30’s
- 4x12 DigiTech
®
Solo
- 2x12 DigiTech Bright
- 4x12 DigiTech Metal
- 4x12 DigiTech Rock
- 4x12 DigiTech Alt Rock
- 4x12 DigiTech Vintage
- No cabinet model
Amp Gain - Knob 3 adjusts the Gain (distortion) for the selected Amp model (not avail-
able for Acoustic). The Gain parameter ranges from to .
Amp Level - Knob 6 adjusts the Level (volume) of the selected Amp model. The Level
parameter ranges from to .
EQ
The RP350’s EQ helps further shape your tone with Bass, Midrange, and Treble controls. To help
get you started, there are four preset EQ curves: Mid Boost (), Scoop (), Bright
(), and Warm () that can be selected using Knob 1. Bass, Midrange, and Treble
parameters range from -12dB to +12dB.
Note: You can select different EQ models and/or modify EQ settings for each amp channel
(Amp A and Amp B). When the EQ row is selected, press the Amp A/B Footswitch to select a
channel. The display will show which channel is selected ( or ).
EQ Model - Knob 1 selects between 4 different EQ modes (Mid Boost, Scoop, Bright,
and Warm), each with different frequency centers for Mid and Treble. Pressing this knob
turns the EQ on and off.
Bass - Knob 2 adjusts the amount of low end level (Bass).
Mid Frequency - Knob 3 selects the frequency that the Mid parameter adjusts. Ranges
from 300 Hz to 5000 Hz.
Mid Range - Knob 4 adjusts the amount of midrange level.
Treble - Knob 5 adjusts the amount of high end level (Treble).
Presence - Knob 6 boosts or cuts the Presence level for the selected channel. Ranges
from -12dB to 12dB.
Treble Frequency (X-Edit
TM
only) - This parameter selects the frequency that the Treble
parameter adjusts. Ranges from 500 Hz to 8000 Hz.
Disclaimer: AutoYa, DigiTech, DOD, Death Metal, Johnson Amplification, Grunge, Lexicon, Multi Chorus,
Whammy, and YaYa are trademarks of Harman International Industries, Inc. Other product names modeled
in this product are trademarks of their respective companies that do not endorse and are not associated or
affiliated with DigiTech or Harman International Industries, Inc. They are trademarks of other manufacturers and
were used merely to identify products whose sounds were reviewed in the creation of this product.
To Next Page
Loading...
Need help?
General
