DigiTech VOCALIST VL3D

10
Using the VL3D with a Guitar
The VL3D can provide fully automatic harmony for a guitar player. Simply
route your guitar signal through the VL3D using the Guitar In and Guitar Thru
jacks. The VL3D monitors what you are playing on the guitar and adjusts the
harmonies to fit over the accompaniment.
To Speakers
1 2 3 4 5 6 L R
You will need to select the musIQ
®
Guitar mode using the
Mode button.
The VL3D must be first in the guitar signal chain to ensure proper musIQ
analysis and harmony generation. Connect the guitar directly to the Guitar In.
The Guitar Thru output can then be connected to any effects pedals before the
amp.