UTILITIES
Overview
The Utilities mode allows you to make global (affecting all programs)
configuration changes to the Vocalist Workstation EX, including MIDI
channel assignments, audio configurations, program, song and style ini-
tialization and user preferences.
To enter and exit Utilities mode:
Press the Utilities button in any of the other operating modes includ-
ing Programs, Edit, and Songs modes. Once you have altered one of
the configuration settings, you can press the Utilities button again to
exit to the screen you started from. For example, this makes it con-
venient during editing to change MIDI channel assignments.
To select one of the configuration menus:
After entering Utilities mode, you can select the configuration menu
you need from the softkeys.
Version Display
This is represented by the abbreviation Vers. Pressing this soft key pro-
duces the introduction screen as shown when the product is first powered
up. Displayed on the second line of this screen is the software version
number. The software version number indicates whether software
updates, if any, have occurred.
MIDI
Pressing the MIDI soft key within Utilities mode presents the MIDI
Utilities sub menu. From this screen you can choose a MIDI Utility to
modify.
MIDI Channel Select
To provide maximum flexibility and to reduce conflicts, the Vocalist
Workstation EX can control the channel assignments of more than just
the usual program changes and continuous controllers. There are three
areas in the Vocalist Workstation EX that can have their own MIDI chan-
nel assignments if required.
The System & Vocoder channel determines which channel program
changes, continuous controller (Pitch Bend, Modulation etc.) and single-
channel Vocoder messages are received upon. When you use the 4 chan-
nel Vocoder mode, the System & Vocoder setting determines the channel
for voice one only.
33
To Next Page
Loading...
Need help?
General
