5. Press the Store button to initialize the song; the unit will respond
with ÒSong Init completeÓ.
6. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
To initialize all unused styles:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Init softkey; this presents the Initialize Utilities sub-menu.
3. Press the softkey corresponding to Style.
4. Press the Store button to initialize all unused styles; the unit will
respond with ÒStyle Init completeÓ.
5. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
To initialize all programs, styles and songs (factory
initialization):
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Init softkey; this presents the Initialize Utilities sub-menu.
3. Press the softkey corresponding to All.
4. Press the Store button. A warning tells you that all user programs,
songs and styles will be lost. To cancel the factory initialization,
press the Exit button; otherwise, press the Store button to perform
the initialization. During the initialization process the version screen
will appear; when initialization is complete, factory program F 1 will
be loaded and the unit is ready to use.
Footswitch Utilities
The Vocalist Workstation EX Footswitch Utilities allow you to reconfig-
ure the functions of the DigiTech FS300 3-button footswitch to meet
your personal preferences.
Any button on the FS300 can be configured to control:
¥ Bypass Latching (BypL) bypass is activated when the
footswitch is pressed and released, stays acti-
vated until the footswitch is pressed and
released again.
¥ Bypass Momentary (BypM) bypass activated only while
footswitch is held down.
¥ Program up (Pgm )
¥ Program down (Pgm¬)
46
To Next Page
Loading...
Need help?
General
