or a sysex librarian program for later retrieval. (Refer to the MIDI Dump
Utilities section above for help.)
An easy way to free up memory in your Vocalist Workstation EX is to
occasionally initialize all unused user styles. This procedure will initial-
ize only the styles which are currently not used by any program, so there
is no danger of changing the sound of existing programs. Initializing
unused styles periodically as a Òroutine maintenanceÓ activity will ensure
that you always have some available memory with which to create and
store new styles.
You also have the option of restoring all factory programs, styles and
songs (factory restore). This option should be used cautiously, since all
user programs, styles and songs are erased in this procedure! Use the fac-
tory restore option only if you are sure that you wish to return the
Vocalist Workstation EX to its initial factory state.
Pressing the Init softkey from within the Utilities mode presents the
Initialize Utilities sub menu.
From the Init screen you can choose to initialize:
¥ a user Program
¥ any Song
¥ all unused styles
¥ all programs, styles and songs (factory restore)
To initialize (clear) a user program:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Init softkey; this presents the Initialize Utilities sub-menu.
3. Press the softkey corresponding to Programs.
4. Use the Data Wheel to select the program to initialize.
5. Press the Store button to initialize the program; the unit will respond
with ÒProg Init completeÓ.
6. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
To initialize a song:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Init softkey; this presents the Initialize Utilities sub-menu.
3. Press the softkey corresponding to Song.
4. Use the Data Wheel to select the song to initialize.
45
To Next Page
Loading...
Need help?
General
