EasyManuals Logo

DigiTech VOCALISTWEX User Manual

DigiTech VOCALISTWEX
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
To dump a single program to another Studio
Vocalist :
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu. If
you are dumping all programs to a sysex librarian, ensure that the
librarian is ready to receive a sysex dump.
3. Press the softkey corresponding to Dump.
4. Press the Right Arrow button once.
5. Press the Store button to dump all programs; the unit will display
ÒDumping...Ó while the dump is in progress. When the dump has
been transmitted in full, the unit will display ÒDumping...completedÓ.
The time required to perform a bulk dump will vary with the number
of programs, styles and songs stored in the unit at any given time.
Typically, a bulk dump will take about ten seconds to complete.
6. Press the Utilities button once again to exit; this will return you to the
mode from which you entered.
To dump all programs (bulk dump) to another
Vocalist Workstation EX or a sysex librarian:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu. If
you are dumping all programs to a sysex librarian, ensure that the
librarian is ready to receive a sysex dump.
3. Press the softkey corresponding to Dump.
4. Press the Right Arrow button twice.
5. Press the Store button to dump all programs; the unit will display
ÒDumping...Ó while the dump is in progress. When the dump has
been transmitted in full, the unit will display ÒDumping...completedÓ.
The time required to perform a bulk dump will vary with the number
of programs, styles and songs stored in the unit at any given time.
Typically, a bulk dump will take about ten seconds to complete.
6. Press the Utilities button once again to exit; this will return you to the
mode from which you entered.
To dump a single song to another Vocalist
Workstation or a sysex librarian:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu. If
you are dumping the song to a sysex librarian, ensure that the librari-
an is ready to receive a sysex dump.
3. Press the softkey corresponding to Dump.
4. Press the Right Arrow button three times.
5. Use the Data Wheel to select the desired song to dump.
Note- Vocalist
Workstation EX and
Vocalist Workstation
Compatibility: You may
perform single program
dumps between these two
products only. The bulk
dump feature will not work.
43

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiTech VOCALISTWEX and is the answer not in the manual?

DigiTech VOCALISTWEX Specifications

General IconGeneral
BrandDigiTech
ModelVOCALISTWEX
CategoryComputer Hardware
LanguageEnglish

Related product manuals