Need help?Do you have a question about the DigiTrak Falcon F1 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Accuracy | ±5% |
| Power Source | Battery |
| Operating Temperature | -20°C to 60°C |
| Frequency Bands | Multiple bands |
Essential safety guidelines for operating the DigiTrak guidance system.
Procedures for maintaining the receiver, transmitter, and accessories for optimal performance.
Guidelines for storing battery packs to ensure safety and longevity.
Overview of the DigiTrak Falcon F1 system and its capabilities.
Guidance on how to effectively use the operator's manual for system information.
Steps for initial setup including frequency optimization and pairing.
Procedure to check for active interference before drilling operations.
Description of the Falcon F1 receiver, its components, and basic functions.
Navigation and explanation of various menu options available on the receiver.
How to set and use the Height-Above-Ground feature for depth readings.
Procedures for calibrating the receiver and performing Above Ground Range checks.
Explanation of the primary screens used for locating the transmitter.
Understanding and marking Front/Rear Locate Points (FLP/RLP) and the Locate Line (LL).
Methods like Tracking On-the-Fly and Target Steering for precise location.
Information on installing batteries and powering the transmitter on and off.
Monitoring transmitter temperature and indicators for overheating.
Information on tracking transmitter runtime for warranty purposes.
Technical specifications for power, environmental requirements, and more.
Explanation of symbols and icons displayed on the receiver screen.
Understanding projected depth and fore/aft offset for steep and deep bores.
Details of the DCI standard warranty, terms, and exclusions.
To Next Page
