Need help?Do you have a question about the DigiTrak FALCON F5 and is the answer not in the manual?
General| Brand | DigiTrak |
|---|---|
| Model | FALCON F5 |
| Category | Measuring Instruments |
| Language | English |
General warnings for operating DigiTrak guidance systems safely.
Procedures to test the DigiTrak system before drilling starts.
Explains interference and its impact on system performance.
Guidelines for storing battery packs to ensure longevity and safety.
Instructions for cleaning and maintaining the equipment.
Periodic cleaning and care for transmitter battery contacts.
Overview of the DigiTrak Falcon F5 guidance system.
Guidance on navigating and using the operator's manual.
Steps to power on the receiver and transmitter.
A step-by-step summary of initial setup procedures for the Falcon F5 receiver.
Description of the receiver and its toggle/trigger switches.
Information on startup screen and audible tones.
Instructions for inputting values using the keypad.
Information on compatible remote displays for the Falcon F5.
Overview of the receiver's menu structure.
Description of the Locate screen and real-time data.
How to power off the receiver.
Procedures for calibrating the receiver and verifying AGR.
Setting and using the HAG feature for depth readings.
Steps to enable and set the roll offset feature.
Using FO to find optimal frequencies for interference avoidance.
Viewing transmitter serial number, temperature, and runtime.
Procedures for setting up new jobs in the DataLog feature.
Using offset, deviation, flags, and pins for bore path tracking.
Performing diagnostics and self-tests on the receiver.
Displaying technical system details like ID and firmware versions.
Overview of the primary locate and depth display screens.
Displaying depth readings and using Max Mode.
Explains active and passive interference and their effects.
Procedures for checking and verifying interference.
Methods to mitigate or overcome interference issues.
How to accurately mark locate points (FLP, RLP) on the ground.
Standard method for locating the transmitter and its heading.
Step-by-step guide to locating the Front Locate Point (FLP).
Locating the Rear Locate Point (RLP) to confirm heading.
Techniques for locating while the drill head is moving.
Methods for locating when unable to walk above the transmitter.
Setting up target steering and understanding the feasible area.
Activating target steering and setting the target depth.
Installing batteries and powering on transmitters.
Specifications for drill heads for optimal transmitter performance.
Monitoring transmitter temperature and overheat indicators.
Procedures for switching between transmitter frequency bands.
Power, environmental, storage, packaging, and disposal requirements.
Tables showing depth increase per rod length.
Explains projected depth and offset for steep/deep transmitters.
Tables for determining depth and offset based on pitch.
Conversion factors for depth calculations based on pitch.
Method to estimate depth using FLP-RLP distance and pitch.
Details of the DCI product warranty terms.
Situations and damages not covered by the DCI warranty.
To Next Page
