- 1 -
© 2018 Digital Control Incorporated, Oct
All rights reserved. 402-1026-21-C metric
www.digital-control.com
Falcon
®
Quick Start Guide
1. IRport
2. Toggle
3. Trigger
Power On the Receiver
1.
Install the battery pack
and hold the trigger for
one second.
2.
Ensure the region number
in the globe icons on the
startup screen and
transmitter match.
3.
Click trigger to open the Main menu (or toggle down at the
Locate screen).
Receiver Main Menu
1. Telemetry channel
2. Transmitter (Tx) type
3. Tx band up/down
4. Battery strength
5. Locate mode
6. Power off
7. Calibration
8. HAG
9. Settings
10. Tx selection
Toggle to menu options and click trigger to select; indicates a
second page. Use Locate mode for locating.
Receiver Locate Screen
1. Locate point (ball)
2. Yaw
3. Receiver
4. Roll indicator and value
5. Roll/pitch update meter
6. Transmitter pitch
7. Transmitter signal strength
8. Transmitter fluid pressure
9. Transmitter temperature
Transmitter and receiver must be Paired before data will display
(page 3). For DigiTrak remote displays, see separate manual or
Quick Start Guide.
To Next Page
Need help?
General
