Power On Receiver
1. Install battery pack and hold
trigger for one second.
2. Click trigger to acknowledge
the warning screen.
3. Note number in globe icon on
startup screen.
4. Click trigger to open Main
menu (or toggle down at the Locate screen).
Receiver Main Menu
1. Telemetry channel 3. Tx frequency
2. Tx type 4. Battery strength
Toggle to menu options and click trigger to select;
indicates a second page. Use Locate mode for locating.
Receiver Locate Screen
© Jul 2015 Digital Control Incorporated
All rights reserved. 402-1003-22-A Australia
www.DigiTrak.com
To Next Page
Need help?
General
