DigiTrak Falcon F1 - Turn HAG on; Turn HAG off

DIGITALCONTROLINCORPORATED
DigiTrak Falcon F1™ Operator's Manual 17
The HAG menu has three options: Turn on, Turn off, and Set. Click the trigger to reach the desired option,
then hold briefly to select.
Turn HAG On
Turn HAG On
To set a different value for HAG or to turn it off, click the trigger to advance to the next screen and skip the
rest of this section. Otherwise, continue below.
This Turn HAG On screen shows the Falcon receiver 1ft. above the ground. To turn HAG on using the
height value displayed, hold the trigger briefly. The receiver beeps and confirms with a check mark ü to
indicate HAG is now on, then returns to the Locate screen.
Depth readings (holding the trigger) must now be taken with the receiver held at this height.
Turn HAG Off
Turn HAG Off
To set the HAG distance, click the trigger to advance to the next screen and skip the rest of this section. To
turn HAG off, continue below.
The Turn HAG Off screen shows the receiver on the ground.
Hold the trigger briefly to turn HAG off. The receiver beeps and confirms with a check mark ü to indicate
HAG is now off, then returns to the Locate screen. The receiver must now be placed on the ground to obtain
accurate depth readings.